Digesil® NC- Pammvi Aviation Pvt. Ltd.

Digesil® NC

Silicone De-polymerizer

Digesil^® NC

Digesil NC de-polymerizes uncured and cured silicone elastomers, resins, oils, and greases from components, surfaces, tools, electronics and process equipment used in engineering, construction, and glazing industries. Digesil NC is effective and fast working. It has a high flash point for safety and contains less than 0.2% aromatics.

Benefits of Digesil NC

Quickly dissolves cured silicone
Leaves a silicone free surface
Chlorinated and fluorinated solvent free
Negligible aromatic solvent content
Environmentally responsible
Low odor for operator comfort
High flash point for safety
Low density for ease of handling
Rinses with water or solvent
Safe on glass, metal, and most plastic (except nylon)
Safe on paint and powder coating
Water free

Application

Important: In all cases water must not be added to Digesil NC or be present on the surface to be cleaned as this will stop Digesil NC from working.

For best results, immerse the part to be cleaned.
Digesil NC will remain effective through 5-10 uses of the cleaning solution or until the action stops.
The effectiveness of the used solution can be enhanced by adding fresh Digesil NC.
Digesil will loosen and debond cured silicone residues in 30 minutes to 1 hour.
Agitation will decrease removal time.
For best results, rinse the part well with isopropanol and then water.
Although the silicone may not break apart on its own, once the part is agitated or the silicone disturbed, it will fall off the substrate.

Packing and Shipping Information

Digesil NC is non-hazardous for shipment and available in 1-gallon, 4×1-gallon cases, and 55-gallon drums.

Specification

Appearance: Liquid

Color: Brown

Odor: Aliphatic-hydrocarbon

Sp.Gr.: 0.82

Hazard Identification

Risk & Safety: Irritating to eyes and skin. May cause lung damage if swallowed

First-aid Measures

Inhalation: Move the exposed person to fresh air at once. Get prompt medical attention.

Eyes: Irrigate with water for at least 15 minutes. Seek medical attention if irritation persists

Skin: Wash contaminated area with soap and water. Seek medical attention if irritation persists.

Ingestion: Do not induce vomiting. Rinse mouth thoroughly. Get medical attention immediately. Consult the MSDS for full Health and Safety information.

Other products available

Digesil^® NC conc. :- High capacity concentrate

Digesil^® Gel :- Thick grade for vertical surfaces

Digesil^® FS :- Removal of flurosilicones

Di-Aqua :- Removal of uncured silicone and silicone oils

Silicone Potting Compound Removed From Wiring Module with Digesil NC

An electrical mistake was discovered in this wiring module after the silicone potting compound had cured. The manufacturer was forced to scrap the entire lot at great cost. By using Digesil NC, RPM was able to remove the silicone potting material with no negative effect on the module. Needless to say, the customer is very satisfied.